Affiliate Disclosure: This article contains affiliate links. If you make a purchase through these links, we may earn a commission at no additional cost to you.
Hello, I’m Mena. Are you familiar with the Panasonic EZ Series? This is a line of cordless power tools chosen by electricians, facility workers, and construction professionals — featuring a “voltage-free” design that lets you use both 14.4V and 18V batteries in a single tool. Job sites often mix multiple brands and voltages, but with the EZ Series you can borrow a colleague’s battery and dramatically reduce setup delays.
In this article, we cover the 11 key models in the Panasonic EZ Series from the perspective of electricians and facility workers. We cover everything from impact drivers and drill drivers to hammer drills, multi-tools, band saws, and stick impacts. For those wondering “which one should I choose,” we also explain how to select by intended use.
What Is the Panasonic EZ Series — The Revolution of Voltage-Free Design
The biggest feature of Panasonic’s EZ Series is its “14.4V/18V dual compatibility.” The same tool body accepts both 14.4V and 18V batteries, letting you reuse whichever battery is on site. For electricians, battery interchangeability means “one tool that works across two voltage environments” — a major advantage.
Many EZ Series models carry IP56 dust and water resistance certification, so you can use them with confidence in rain or dusty conditions. Panasonic has been manufacturing wiring devices and electrical equipment since its days as Matsushita Electric Works. The power tools born from that expertise have long been trusted for their ease of use and reliability in the hands of electricians.
The EZ Series offers a broad lineup not just for electricians but for all types of facility workers including HVAC, plumbing, and interior professionals. From basic tools like impact drivers, drill drivers, and hammer drills to multi-tools, band saws, stick impacts, and job site cleaners — one set of EZ Series batteries can cover your entire job site.
Panasonic EZ Series: Spec Comparison of 11 Models
| Model | Function | Voltage | Max Torque/Capacity | Features |
|---|---|---|---|---|
| EZ75A9LJ2G-B | Multi-Impact | 14.4V/18V | 165N·m | Impact+Drill 2-in-1, IP56 |
| EZ76A1LJ2GT1 | Impact Smart BL | 14.4V/18V | 170N·m | Electronic Torque Control, 118mm Length |
| EZ74A3LJ2GT1 | Drill + Tap | 14.4V/18V | 120N·m | Tap Mode, IP56 |
| EZ78A1LJ2G-H | Hammer Drill | 14.4V/18V | φ26mm | 3-Mode, Dust Cup Included |
| EZ74A2LJ2G-B | Drill Driver | 14.4V/18V | Siding φ80 | Speed Setting, 178mm Length |
| EZ46A5LJ2G-B | Multi-Tool | 14.4V/18V | Cut/Grind/Strip | OIS/STARLOCK Compatible |
| EZ45A5X-B | Band Saw | 14.4V/18V | φ63.5mm | Body Only, Pipe Cutting |
| EZ7521LA2S-B | Stick Impact | 7.2V | 25N·m | 195mm Length, Tight Spaces |
| EZ37A3-B | Stick Cleaner | 14.4V/18V | 45W | Body Only, Construction |
| EZ78A1X-B | Hammer Drill Body | 14.4V/18V | φ26mm | 4-Mode, Body Only |
| EZ74A2PN2G-B | Drill Lightweight Set | 18V | Siding φ80 | 3.0Ah Lightweight, IP56 |
Panasonic EZ Series: Top 11 Recommended Models
① EZ75A9LJ2G-B Cordless Multi-Impact Driver 18V 5.0Ah 2-Battery Set Black
MenaWorks with either 14.4V or 18V batteries — that alone changes how you plan your day on site. One tool that handles both impact and drill work means a lighter toolbox, which is always the right call.
| Manufacturer | Panasonic |
| Model Number | EZ75A9LJ2G-B |
| Function | Impact / Drill Driver 2-in-1 |
| Max Torque | 165 N·m (at 18V) |
| Compatible Voltage | 14.4V / 18V Dual |
| Dust/Water Protection | IP56 |
| Accessories | 18V 5.0Ah Battery ×2, Charger & Case |
A cordless multi-impact driver that combines both impact and drill functions in a single unit. With a maximum torque of 165 N·m (at 18V), it handles everything from screw driving and anchor setting to φ65mm wood boring. Its dual-compatible design works with either 14.4V or 18V batteries, freeing you from job site battery constraints.
IP56 dust and water protection stands up to concrete dust and rainy conditions. In drill mode, you can switch to low-speed rotation for safe and precise drilling into siding and wood.
The top choice for electricians as their “first tool to buy.” It’s a bit heavier than a dedicated impact driver, but handling two tools’ worth of work with one is the best value in the EZ Series.
② EZ76A1LJ2GT1 Cordless Impact Driver Smart BL 18V 5.0Ah 2-Battery Set
MenaSmart BL stops just before you strip a screw. Eliminating those “oh no” moments makes a real difference in finish quality. For pros who demand precision, this is the one.
| Manufacturer | Panasonic |
| Model Number | EZ76A1LJ2GT1 |
| Function | Impact Driver with Smart BL Control |
| Max Torque | 170 N·m (at 18V) |
| Overall Length | 118 mm |
| Compatible Voltage | 14.4V / 18V Dual |
| Dust/Water Protection | IP56 |
| Accessories | 18V 5.0Ah Battery ×2, Charger & Case |
A premium EZ Series impact driver featuring Smart BL control. Electronic control monitors torque in real time and automatically stops when the screw is fully driven. This dramatically reduces over-driving and stripped screws, significantly improving finish quality.
At 118mm in length, this is among the shortest in the EZ Series. It maneuvers easily around tight switch boxes and in ceiling cavities, reducing arm strain during extended work. Maximum torque of 170 N·m is class-leading output for the series.
The choice for job sites that demand both precision and power — electrical, interior, and HVAC. If you’re torn between this and the EZ75A9, choose this one if you don’t need the drill function. It’s the precision-first option.
③ EZ74A3LJ2GT1 Cordless Drill Driver with Tap Mode 18V 5.0Ah 2-Battery Set Black & Gold
MenaA drill driver with a tap function is rare. If you can do threading right on site, that’s one less tool to haul. Any tool that cuts setup time is a win.
| Manufacturer | Panasonic |
| Model Number | EZ74A3LJ2GT1 |
| Function | Drill Driver + Tap Mode |
| Max Torque | 120 N·m (at 18V) |
| Drilling Capacity | Siding φ80mm (at 18V) |
| Compatible Voltage | 14.4V / 18V Dual |
| Dust/Water Protection | IP56 |
| Accessories | 18V 5.0Ah Battery ×2, Charger & Case |
A specialized drill driver for electricians and facility workers, featuring tap (threading) mode. Thread cutting for conduit can be done right on site, eliminating the need to bring a separate tapper. Electronic control tap mode supports both forward and reverse rotation for threading.
In drill mode, it handles φ80mm siding drilling (at 18V). It covers a wide range from pilot hole drilling in wood, metal, and concrete to screw driving. Maximum torque of 120 N·m is more than sufficient for driving screws.
IP56 dust/water protection and 14.4V/18V dual compatibility complete the standard EZ Series strengths. If your job site involves threading work for plumbing or HVAC systems, the EZ74A3 should be your first consideration.
④ EZ78A1LJ2G-H Cordless Multi Hammer Drill 18V 5.0Ah 2 Batteries, Charger, Case & Dust Cup Gray
MenaOne tool for drilling concrete and driving screws. It’s heavy, I’ll admit. But bring this one tool to the job site and you don’t need to carry a separate hammer drill and driver.
| Manufacturer | Panasonic |
| Model Number | EZ78A1LJ2G-H |
| Function | Hammer Drill / Vibration Drill / Driver 3-Mode |
| Drilling Capacity | Concrete φ26mm |
| Compatible Voltage | 14.4V / 18V Dual |
| Dust/Water Protection | IP56 |
| Accessories | 18V 5.0Ah Battery ×2, Charger, Case & Dust Collection Cup |
A cordless multi hammer drill with three switchable modes: hammer drill, vibration drill, and driver. It handles φ26mm concrete drilling, covering key electrical work tasks like anchor setting and conduit penetration holes. The included dust collection cup handles dust control right on site.
14.4V/18V dual compatibility means EZ Series batteries work as-is. IP56 dust and water protection provides confidence in harsh conditions. For job sites with heavy concrete work, this is the reliable primary tool.
Driver mode handles screw driving too, so one tool covers everything from hammer drill work to fastening. If you already have EZ Series batteries, buying the body-only version (EZ78A1X-B) is a smart cost-saving move.
⑤ EZ74A2LJ2G-B Cordless Drill Driver 18V 5.0Ah 2 Batteries, Charger & Case, Black
MenaBeing able to change speed quickly changes your work rhythm. Whether you’re switching from wood to steel plate to siding, one setting adjustment handles it all — that’s the kind of usability that matters.
| Manufacturer | Panasonic |
| Model Number | EZ74A2LJ2G-B |
| Function | Drill Driver (with Speed Setting) |
| Drilling Capacity | Siding φ80mm (at 18V) |
| Overall Length | 178 mm |
| Compatible Voltage | 14.4V / 18V Dual |
| Dust/Water Protection | IP56 |
| Accessories | 18V 5.0Ah Battery ×2, Charger & Case |
The standard drill driver in the EZ Series, featuring a speed setting function. Quick speed switching lets you work at the optimal rate for any material — wood, metal plate, or siding. The φ80mm siding drilling capacity (at 18V) is more than adequate for running conduit through ceilings and walls.
At 178mm overall length, its compact design gives you good maneuverability for ceiling work and tight spaces. Compared to the EZ74A3 (with tap mode), if you don’t need threading capability, this one is lighter and simpler to use.
IP56 dust/water protection and 14.4V/18V dual compatibility are standard across the series. If you’re building a unified EZ Series setup for electrical and facility work, this is the first drill driver to choose.
⑥ EZ46A5LJ2G-B Cordless Multi-Tool 14.4V/18V Dual OIS/STARLOCK Compatible 18V 5.0Ah 2-Battery Set Black
MenaSTARLOCK compatibility dramatically expanded the blade options. When cutting drywall in a ceiling cavity, having this tool vs. not having it makes a real difference in how long the job takes.
| Manufacturer | Panasonic |
| Model Number | EZ46A5LJ2G-B |
| Function | Multi-Tool (Cutting / Grinding / Scraping) |
| Blade Standard | OIS & STARLOCK Compatible |
| Compatible Voltage | 14.4V / 18V Dual |
| Dust/Water Protection | Not Listed |
| Accessories | 18V 5.0Ah Battery ×2, Charger & Case |
A cordless multi-tool compatible with both OIS and STARLOCK blade standards. By swapping attachments, it handles cutting, grinding, stripping, and scraping — all in one versatile tool. Compatible with both 14.4V and 18V EZ Series batteries.
STARLOCK compatibility opens up a wide range of general-purpose blade options. It handles cutting and finishing across all materials — drywall, wood, metal, tile, and adhesives. It really shines for opening work in ceiling cavities and wall surfaces.
This is the specialist tool for “cutting, grinding, and stripping” jobs that an impact or drill can’t handle. If you want full coverage with the EZ Series, this is the third tool to add after an impact driver and hammer drill.
⑦ EZ45A5X-B Cordless Band Saw 14.4V/18V Dual Body Only Black
MenaFor cutting conduit, a band saw is the right answer. Safer than a grinder and leaves a cleaner cut. Since the battery is shared with the EZ Series, the extra cost is minimal.
| Manufacturer | Panasonic |
| Model Number | EZ45A5X-B |
| Function | Cordless Band Saw (Body Only) |
| Max Cutting Diameter | φ63.5 mm |
| Compatible Voltage | 14.4V / 18V Dual |
| Accessories | Body Only (Battery & Charger Sold Separately) |
A cordless band saw with a maximum cutting diameter of φ63.5mm. The ideal specialist tool for on-site cutting of conduit and plumbing pipe. Band blade cutting produces minimal chips and burrs, leaving a clean cut surface. Far safer than a grinder, it can be used with confidence even in tight spaces.
Compatible with both 14.4V and 18V EZ Series batteries for direct reuse. Buying the body-only version (EZ45A5X-B) is a major cost advantage. If you already have dual batteries, the only extra cost is the body itself.
Conduit cutting happens on every electrical job site. Once you experience the difference between a grinder and a band saw, you won’t want to go back to working without one — that’s how much it changes your efficiency.
⑧ EZ7521LA2S-B Cordless Stick Impact Driver 7.2V 2 Batteries, Charger & Case, Black
MenaThis is the only impact driver that fits inside a switch box. A lifesaver for tight spots where a regular impact won’t reach. Small, but it does a full professional job.
| Manufacturer | Panasonic |
| Model Number | EZ7521LA2S-B |
| Function | Cordless Stick Impact Driver |
| Max Torque | 25 N·m |
| Overall Length | 195 mm |
| Voltage | 7.2V (Different Battery from EZ Series) |
| Accessories | 7.2V Battery ×2, Charger & Case |
An ultra-compact pen-style impact driver measuring just 195mm overall. A specialist tool designed for screw driving in tight spaces where a standard impact won’t fit — switch boxes, distribution panel interiors, and behind panels. Wide LED illumination keeps your hands visible even in dark spots.
Uses 7.2V batteries on a separate system from the EZ Series, but it comes with a dedicated charger set so you can start using it right away. 25 N·m of torque is more than sufficient for small screw work.
Every electrician knows that moment — “the impact can’t reach inside the switch box.” The EZ7521 is worth having for that reason alone. On job sites where tight-space work is frequent, this is a must-have.
⑨ EZ37A3-B Cordless Stick Cleaner for Construction 14.4V/18V Dual Body Only Black
MenaPost-construction cleanup with just one EZ Series battery. No need to buy a separate battery just for a vacuum — it’s a small thing, but genuinely appreciated.
| Manufacturer | Panasonic |
| Model Number | EZ37A3-B |
| Function | Cordless Stick Cleaner for Construction |
| Suction Power | 45 W (at 18V) |
| Compatible Voltage | 14.4V / 18V Dual |
| Accessories | Body Only (Battery & Charger Sold Separately) |
A cordless cleaner designed specifically for construction job sites. With 45W suction power (at 18V), it powerfully vacuums post-construction dust, shavings, and concrete powder. Compatible with both 14.4V and 18V EZ Series batteries for direct reuse.
Available as body only (EZ37A3-B), so if you already have dual batteries, the only additional cost is the body itself. Being able to add a vacuum to the same battery system as your power tools is one of the EZ Series’ key strengths.
Post-job site cleanup is an often-overlooked time cost. Compared to hauling in a corded vacuum, the efficiency of quickly cleaning up with a single EZ37A3 battery is on a completely different level. If you’re unifying your job site with the EZ Series, this is the last tool to add to complete the set.
⑩ EZ78A1X-B Cordless Multi Hammer Drill 14.4V/18V Dual Body Only Black
MenaIf you already have 14.4V or 18V batteries, the body-only version is plenty. Adding a hammer drill while saving on battery costs — that’s smart cost management.
| Manufacturer | Panasonic |
| Model Number | EZ78A1X-B |
| Function | Hammer Drill / Vibration Drill / Drill / Driver 4-Mode |
| Drilling Capacity | Concrete φ26mm |
| Compatible Voltage | 14.4V / 18V Dual |
| Dust/Water Protection | IP56 |
| Accessories | Body Only (Battery & Charger Sold Separately) |
The body-only version of the EZ78A1LJ2G-H. Features four modes — hammer drill, vibration drill, drill, and driver — and handles φ26mm concrete drilling. IP56 dust and water protection for confidence in tough conditions.
If you already have EZ Series 14.4V/18V dual batteries, buying the body only can save you significantly. Since batteries cost a lot, body-only purchasing is the standard approach for smart cost management.
The optimal answer for a tradesperson who has already standardized on EZ Series batteries and wants to add a hammer drill. Significantly cheaper than buying a set, it helps keep the overall cost of your EZ Series toolkit down.
⑪ EZ74A2PN2G-B Cordless Drill Driver 18V 3.0Ah Lightweight 2 Batteries, Charger & Case, Black
MenaA lighter battery changes how tired you get during long work sessions. For electricians who spend a lot of time working overhead, 3.0Ah is sufficient in many cases. The compact size is quietly appreciated too.
| Manufacturer | Panasonic |
| Model Number | EZ74A2PN2G-B |
| Function | Drill Driver (Lightweight 3.0Ah Battery Set) |
| Drilling Capacity | Siding φ80mm (at 18V) |
| Battery Capacity | 3.0Ah (Lightweight) |
| Compatible Voltage | 18V (Dual-Compatible Body) |
| Dust/Water Protection | IP56 |
| Accessories | 18V 3.0Ah Battery ×2, Charger & Case |
The lightweight 3.0Ah battery set version of the EZ74A2. Using lighter batteries reduces the overall tool weight, minimizing fatigue during extended overhead work like ceiling installation. φ80mm siding drilling and IP56 dust/water protection are included as standard EZ Series specs.
Charging frequency is higher than the 5.0Ah version, but with two batteries alternating, the practical impact is minimal. This is the model for tradespeople who can judge when to prioritize lightness and maneuverability over runtime.
When choosing between this and the EZ74A2LJ2G-B (5.0Ah), judge by your main working hours. If work is under half a day, 3.0Ah is sufficient; for full-day work, 5.0Ah is the safe choice.
How to Choose Your Panasonic EZ Series Tools
When selecting EZ Series tools, starting from your main use case is the most straightforward approach. Here’s a breakdown across four major categories.
- Impact Drivers: If you do a lot of screw driving and anchor setting, choose either the EZ75A9 (Multi-Impact) or EZ76A1 (Smart BL). For precision tightening, the Smart BL-equipped EZ76A1 has the edge. The Multi-Impact EZ75A9 includes drill function, so if you also drill frequently, this gives you better value.
- Drill Drivers: For frequent siding drilling or woodworking, choose the EZ74A2 or EZ74A3. Facility workers who need threading (tap work) will find the EZ74A3’s tap mode invaluable. If you spend a lot of time doing overhead ceiling work, the lightweight 3.0Ah EZ74A2PN2G-B is also an option.
- Hammer Drills: If concrete drilling is essential, the EZ78A1 is the clear choice. Three-mode switching (hammer, vibration drill, driver) covers a broad range with one tool. If you already have dual batteries, the body-only EZ78A1X-B saves you money.
- Specialty Tools: For conduit and pipe cutting, the band saw (EZ45A5); for screw driving in tight spaces, the stick impact (EZ7521); for combined finishing, cutting, and grinding, the multi-tool (EZ46A5). If you want to handle cleanup with your job site batteries too, adding the stick cleaner (EZ37A3) is a convenient choice.
For battery consolidation, we recommend starting with the tool you use most (typically an impact driver) and buying the full battery and charger set. Add subsequent tools as body-only purchases to keep battery costs down while unifying your job site with the EZ Series.
Frequently Asked Questions (FAQ)
Should I choose 14.4V or 18V batteries?
For getting started, we recommend the 18V 5.0Ah set. It offers the best balance of power and runtime, letting you get the full performance of the EZ Series. If you already have 14.4V batteries, the EZ Series works with them directly, so no additional purchase is necessary.
How does it compare to Milwaukee?
Milwaukee is internationally recognized for power and battery compatibility. By contrast, the EZ Series’ greatest strength is its design tailored to Japanese job site conditions — specifically its “14.4V/18V dual compatibility.” Since electrical and facility work sites often mix multiple voltage ranges, the EZ Series’ voltage-free design offers a practical advantage.
Can the EZ Series be used by people other than electricians?
Absolutely. The lineup is designed for all types of facility workers including HVAC, plumbing, interior finishing, and construction professionals. The hammer drill and band saw in particular have general-purpose versatility that crosses trade boundaries. Some models may be slightly overspec for general DIY users, but the quality is genuinely professional grade.
Conclusion: Voltage-Free Design Changes How You Work on Site
The Panasonic EZ Series supports electricians and facility workers on the job with its unique 14.4V/18V dual-compatible design. Battery interchangeability enables sharing across multiple job sites and with colleagues, dramatically reducing the cost and effort of tool management.
Many models carry IP56 dust and water protection, making them tough enough to use without worry even on rainy days. The ability to unify everything from impact drivers to cleaners in a single series makes battery management overwhelmingly simple.
Start by choosing your first tool based on your primary use case and buying the battery set. Then build out additional tools as body-only purchases — that’s the smartest way to maximize the EZ Series. The reasons to choose Panasonic on an electrical job site come down to three things: reliability, ease of use, and voltage-free flexibility.
Related Articles
- DeWALT DCF Series Impact Drivers: Top 10
- Makita HS Series Cordless Circular Saws: Top 7 Recommendations
- Featured Recommended Power & DIY Tools
More Related Articles You May Also Like
Check out more related articles on power tool brands and cordless tools.
- [Review] The King of Multi-Voltage! HiKOKI MultiVolt 36V-Compatible Tools: 10 Models Thoroughly Explained [2026 Edition]
- Bosch Professional GDR Series Impact Drivers: All-Model Comparison [2026 Edition] — The Complete Guide for Tradespeople
- [Review] The Ultimate Showdown of 7 Brands! Power Tool Maker Rankings 2026 Thoroughly Explained | Brand Features & How to Choose