Affiliate Disclosure: This article contains affiliate links. If you make a purchase through these links, we may earn a commission at no additional cost to you.
DEWALT’s TSTAK system sits between simple stackable toolboxes and the heavy-duty TOUGHSYSTEM line. It is not a direct successor to TOUGHSYSTEM — rather, it fills the gap for users who find TOUGHSYSTEM too large and heavy to carry around comfortably.
This article compares 7 TSTAK boxes, drawers, and accessories by size and use case, covering everything from a compact shallow box to a rolling 4-wheel carrier.
メナTSTAK trades some of TOUGHSYSTEM’s ruggedness for lighter weight and a more manageable size — a good fit for vehicle storage and jobs that require frequent relocation.
What is TSTAK?
TSTAK is DEWALT’s modular tool storage platform. All boxes use the same stacking latch system, so units can be combined freely to build a personalized storage setup. The current generation, TSTAK 2.0, adds reinforced metal latches and IP54 dust/splash resistance over earlier models.
TSTAK and TOUGHSYSTEM use different latch standards and are **not compatible** with each other — pick one system and stick with it for stacking compatibility.
7 Recommended TSTAK Boxes, Drawers & Accessories
DEWALT TSTAK Shallow Box (DWST83345-1)





With 709 ratings and 4.6 stars, this shallow box is a solid, widely-used entry point into the TSTAK system.
The TSTAK Shallow Box is a compact stacking case with IP54 dust and splash resistance, metal front latches, and a customizable foam insert. It’s a good starting unit for building out a TSTAK stack.


Two carry handles (front and top) make it easy to grab on its own or as part of a stacked set, and the label holder lets you mark contents at a glance.


With 4.6 stars from over 700 ratings on Amazon, it’s a well-proven entry unit for anyone starting a TSTAK collection.


DEWALT TSTAK Deep Toolbox (DWST83343-1)


The TSTAK Deep Toolbox offers more internal volume than the shallow box, with the same IP54 rating and metal latches, plus a removable tool tray for easier access to items underneath.


The long handle design makes it comfortable to carry solo, and the TAG Tool Connect slot supports DEWALT’s tracker accessory for those who want to keep tabs on their box.


With 4.6 stars from around 400 ratings, it’s a solid choice for anyone who needs more depth than the shallow box offers without stepping up to the mobile storage unit.


DEWALT TSTAK Mobile Storage Box (DWST83347-1)



With 922 ratings and 4.7 stars, this is one of the highest-rated units in the TSTAK lineup.
The Mobile Storage Box adds a telescopic handle and durable heavy-duty wheels to the standard TSTAK box, with a 30 kg maximum load capacity and IP54 sealing.


It’s designed to be rolled rather than carried, making it practical for larger tool loads or for anyone who wants to move a full stack without lifting it.


With nearly 1,000 ratings at 4.7 stars, it’s the most rolling-friendly option in this lineup for job sites that require frequent relocation.


DEWALT TSTAK III Single Deep Drawer (DWST17803)
The TSTAK III is a single deep drawer organizer with removable compartments and heavy-duty latches, designed to hold small tools and accessories in an organized layout.


Ball-bearing slides keep the drawer smooth even under heavier loads, and it stacks cleanly on or under other TSTAK components.


With nearly 3,000 ratings at 4.7 stars, it’s one of the most established drawer units in the TSTAK system.


DEWALT TSTAK IV Double Shallow Drawers (DWST17804)



With nearly 4,000 ratings, this is the most-reviewed product in this comparison — a strong signal of widespread everyday use.
The TSTAK IV features two shallow drawers instead of one deep drawer, suited to sorting smaller parts and hardware where depth matters less than compartmentalization.


It holds up to 16.5 lbs and, like the other drawer units, stacks directly with the rest of the TSTAK lineup using the same latch system.


With 4.7 stars from nearly 4,000 ratings, it’s a proven choice for anyone organizing small parts on a job site or in a shop.


DEWALT TSTAK Organizer (DWST82968-1)


The TSTAK Organizer has a transparent lid for at-a-glance contents checking, plus a removable tray — well suited to small parts like screws, bits, and batteries.


Its compact form factor makes it easy to slot into a stack alongside larger boxes without adding much bulk.


With 4.7 stars from 89 ratings, it’s a smaller-footprint pick for anyone who needs granular small-parts organization rather than bulk tool storage.


DEWALT TSTAK 4-Wheel Cart Carrier (DWST17889)



With 999 ratings and 4.7 stars, the carrier is one of the best-reviewed accessories in the entire TSTAK lineup.
The TSTAK Cart is a 4-wheel rolling base rated for up to 220 lbs (100 kg), designed to carry a full stack of TSTAK boxes across a job site without repeated lifting.


A locking mechanism at the base holds the stack securely in place while rolling, and the heavy-duty wheels handle uneven ground reasonably well.


Many TSTAK users consider this cart close to essential once a stack grows beyond two or three boxes — it’s the accessory most likely to turn a pile of boxes into a genuinely portable system.


Frequently Asked Questions (FAQ)
Q: Is TSTAK compatible with TOUGHSYSTEM?
A: No. TSTAK and TOUGHSYSTEM are both DEWALT stacking systems, but they use different latch standards and cannot be stacked together. Pick one system and stay within it.
Q: Is TSTAK dust and water resistant?
A: The current TSTAK 2.0 generation (including the Shallow Box and Deep Toolbox in this comparison) carries an IP54 rating, meaning protection against dust ingress and water splashed from any direction. It is not designed for submersion.
Q: Is TSTAK a good fit for vehicle storage?
A: Yes. TSTAK’s more compact footprint compared to TOUGHSYSTEM makes it easier to fit in a truck bed or van, and combining it with the 4-wheel carrier makes moving a full stack considerably easier.
Summary: Building a TSTAK Setup That Fits Your Work
The Shallow Box and Deep Toolbox make a solid starting pair for general storage, the drawer units (TSTAK III/IV) add organization for small parts, and the Mobile Storage Box or 4-Wheel Carrier turn a growing stack into something you can actually move around a job site without strain.



Since TSTAK and TOUGHSYSTEM aren’t interchangeable, it’s worth deciding upfront which system fits your typical job size and mobility needs before buying your first box.


