This article contains affiliate links. If you make a purchase through these links, we may earn a commission at no additional cost to you.
DeWalt’s impact tools are the go-to choice for US professionals on the jobsite. The DCF series is their core lineup, ranging from compact drivers to high-torque wrenches across 10 models. This page breaks down every model by specs, application, and which to choose for your specific work.
メナLine up the DeWalt DCF series side by side and the design consistency and application logic become clear. If you thought “they all look the same,” reading this will change your mind.
All 10 DeWalt DCF Series Models — Specs and Features Fully Explained
① DCF860E2T-JP | 18V XR Flagship Impact Driver
メナThe top of the DCF series. 18V XR with 282 Nm — specs that hold their own against any Japanese-market impact driver. Choose this and you experience DeWalt at full power.
| Manufacturer | DEWALT |
| Model | DCF860E2T-JP |
| Voltage | 18V XR |
| Max Fastening Torque | 282 Nm |
| RPM | 3,800 rpm |
| IPM | 4,500 ipm |
| Overall Length | 116 mm |
| Battery | 1.7Ah × 2 + charger included |
The DCF860E2T-JP is the flagship of DeWalt’s 18V XR lineup. Its 282 Nm max fastening torque ranks among the top specifications even compared to major Japanese brands, and it features 3-speed switching. The kit includes two 1.7Ah lightweight batteries, a charger, and a TSTAK kit box — ready to deploy on the jobsite immediately.
Standout features include a 9-LED spotlight mode for excellent visibility in dark or confined spaces, dramatically improving efficiency. The Precision Drive function automatically controls torque in the final stage of fastening, reducing the risk of stripping screw heads. For professionals already on the DeWalt 18V battery platform, this is a machine that delivers results from day one.
② DCF850P2T-JP | 18V XR ATOMIC Compact Impact Driver
メナAt 101mm overall length, this is among the shortest 18V impact drivers DeWalt makes. True to the ATOMIC name, this model is built around compactness. Especially compelling for tradespeople who frequently work in tight spaces.
| Manufacturer | DEWALT |
| Model | DCF850P2T-JP |
| Voltage | 18V XR |
| Max Fastening Torque | 205 Nm |
| RPM | 3,250 rpm |
| IPM | 3,800 ipm |
| Overall Length | 101 mm |
| Battery | 5.0Ah × 2 + charger included |
The DCF850P2T-JP is the core ATOMIC series model, packing 205 Nm of high torque into a 101mm compact body. For electricians and plumbers who frequently work in confined spaces, this size difference translates directly into working hours.
3-speed switching and Precision Drive handle everything from precision screw driving to forceful fastening. The included 5.0Ah batteries × 2 keep you going all day long.
③ DCF845P2T-JP | 18V XR ATOMIC Lightweight Impact Driver
メナAn ATOMIC model built purely around light weight. Compact and light together — delivers results for extended overhead work and precision assembly.
| Manufacturer | DEWALT |
| Model | DCF845P2T-JP |
| Voltage | 18V XR |
| Max Fastening Torque | 182 Nm |
| RPM | 2,800 rpm |
| IPM | 3,200 ipm |
| Overall Length | 100 mm |
| Battery | 5.0Ah × 2 + charger included |
The DCF845P2T-JP is a further weight-reduction iteration of the DCF850. At 100mm overall length, the ultra-compact body causes less arm fatigue during ceiling work and precision assembly.
Max fastening torque is 182 Nm — lower than the DCF850, but fully sufficient for general construction and interior work. It suits situations requiring more delicate torque control than the DCF850.
④ DCF887M2-JP | 18V XR 3-Speed Standard Impact Driver
メナThe DCF887 has been the trusted standard DeWalt model for years. The 3-speed switching and Precision Drive — once you get used to them, you will not want to give them up.
| Manufacturer | DEWALT |
| Model | DCF887M2-JP |
| Voltage | 18V XR |
| Max Fastening Torque | 205 Nm |
| RPM | 3,250 rpm |
| IPM | 3,800 ipm |
| Overall Length | 115 mm |
| Battery | 4.0Ah × 2 + charger included |
The DCF887M2-JP is the longest-running bestseller in the DCF series. The 205 Nm torque and 3-speed switching perform across woodworking, metalwork, and electrical work on a wide range of jobsites.
Precision Drive automatically controls torque in the final stage of fastening, preventing screw-head damage from overdriving. Includes 4.0Ah batteries × 2 — more than sufficient for everyday professional use.
⑤ DCF887N-JP | 18V XR 3-Speed Impact Driver (Body Only)
メナIf you already have DeWalt 18V batteries, the DCF887N-JP is the smart choice. Same performance as the DCF887M2 — body only. Dramatically better value for professionals with two batteries already on hand.
| Manufacturer | DEWALT |
| Model | DCF887N-JP |
| Voltage | 18V XR |
| Max Fastening Torque | 205 Nm |
| RPM | 3,250 rpm |
| IPM | 3,800 ipm |
| Overall Length | 115 mm |
| Battery | Sold separately (compatible with 18V XR series) |
Performance is identical to the DCF887M2 — 205 Nm torque, 3-speed switching, and Precision Drive are all included. Suitable as a second machine for tradespeople who need a backup, or as the first step when switching to the DeWalt 18V platform.
⑥ DCF809P2-JP | 18V XR ATOMIC Ultra-Compact Impact Driver
メナ87mm overall length says it all. The most compact model in the ATOMIC series — the tool specialists in confined-space work reach for.
| Manufacturer | DEWALT |
| Model | DCF809P2-JP |
| Voltage | 18V XR |
| Max Fastening Torque | 202 Nm |
| RPM | 2,800 rpm |
| IPM | 3,400 ipm |
| Overall Length | 87 mm |
| Body Weight | 0.93 kg |
The DCF809P2-JP is the most compact model in DeWalt’s ATOMIC series. At 87mm overall length — among the shortest in the industry — that size is a weapon in cramped spaces.
At 202 Nm, the torque is more than enough power for its body size, handling general jobsite tasks without issue. For plumbing and electrical work that frequently requires reaching deep into structural cavities, this size is the deciding factor.
⑦ DCF870E2T-JP | 18V XR Silent Hydraulic Impact Driver
メナNo hammering noise — that is the hallmark of a hydraulic impact driver. Whether you can use this on jobsites in residential neighborhoods or where quiet work is required is what separates the professionals.
| Manufacturer | DEWALT |
| Model | DCF870E2T-JP |
| Voltage | 18V XR |
| Max Fastening Torque | 193 Nm |
| RPM | 2,500 rpm |
| IPM | 2,700 ipm |
| Overall Length | 140 mm |
| Noise Level | Under 70 dB (hydraulic silent mechanism) |
The DCF870E2T-JP uses a hydraulic impact mechanism for dramatically reduced noise compared to conventional impact drivers. It delivers its true value on jobsites in dense residential areas, hospitals, schools, and anywhere quiet operation is required.
Max fastening torque is 193 Nm — lower than the flagship DCF860 but fully adequate for interior work, furniture assembly, and equipment installation. Do not cut corners on this tool when your jobsite requires quiet operation.
⑧ DCF801D2-JP | 10.8V/12V XR Compact Impact Driver
メナA 10.8V compact impact driver. For electrical work, sash installation, and other tasks requiring precise torque control, this size is a genuine advantage.
| Manufacturer | DEWALT |
| Model | DCF801D2-JP |
| Voltage | 10.8V / 12V XR |
| Max Fastening Torque | 107 Nm |
| RPM | 2,650 rpm |
| IPM | 3,200 ipm |
| Overall Length | 85 mm |
| Body Weight | 0.85 kg |
The DCF801D2-JP is DeWalt’s 10.8V/12V XR series impact driver. Its exceptional lightweight compact form — 85mm length, 0.85kg body weight — reduces fatigue during precision work and extended continuous use.
At 107 Nm max torque, it is lower than 18V models, but for sash installation, electrical device assembly, and precision screw driving where excess torque works against you, this is exactly the right power level. For tradespeople already on the 10.8V platform, the battery-sharing advantage is significant.
⑨ DCF911P2T-JP | 18V XR Brushless Impact Wrench 1/2″
メナ542 Nm max fastening torque — power that handles everything from tire changes to heavy-equipment bolt fastening. This is a dedicated fastening machine, categorically different from an impact driver.
| Manufacturer | DEWALT |
| Model | DCF911P2T-JP |
| Voltage | 18V XR |
| Max Fastening Torque | 542 Nm |
| Drive Size | 1/2″ (12.7 mm) |
| RPM | 2,400 rpm |
| IPM | 3,300 ipm |
| Battery | 5.0Ah × 2 + charger included |
The DCF911P2T-JP is a 1/2″ drive 18V XR impact wrench. The 542 Nm max fastening torque handles high-torque applications — tire changes, scaffold bolts, and heavy equipment maintenance.
Unlike an impact driver, this uses a 12.7mm square drive, so standard JIS sockets can be used directly. For professionals in construction, automotive service, and agricultural machinery maintenance who regularly use wrenches, this is the most practical machine in the DCF series.
⑩ DCF902D2T | 10.8V XR Brushless Compact Impact Wrench 3/8″
メナA compact wrench specialized for engine bay and tight-space maintenance work. The combination of 168 Nm and 10.8V provides just the right power for small vehicle and bicycle maintenance.
| Manufacturer | DEWALT |
| Model | DCF902D2T |
| Voltage | 10.8V XR |
| Max Fastening Torque | 168 Nm |
| Drive Size | 3/8″ (9.5 mm) |
| RPM | 2,850 rpm |
| IPM | 3,600 ipm |
| Body Weight | 1.01 kg |
The DCF902D2T is DeWalt’s 10.8V XR 3/8″ drive impact wrench. The compact body and 168 Nm torque are perfectly suited for automotive engine bay work and nut fastening in tight locations.
At 1.01kg, the lightweight design minimizes fatigue during extended work, and a 3/8″ socket adapter lets you use standard socket sets directly. For DeWalt users already on 10.8V, this is an easy additional investment as a maintenance wrench.
How to Choose the Right DeWalt DCF for You
Choose: Impact Driver or Impact Wrench
The DCF series divides broadly into “impact drivers (1/4″ hex bit)” and “impact wrenches (square drive socket).” If your work is mainly screws and drilling, choose a driver: DCF860, 850, 845, 887, 809, 870, or 801. If tire changes and bolt fastening are your main tasks, choose a wrench: DCF911 or DCF902.
Choose by Battery Voltage (18V vs. 10.8V)
The 18V XR series is for power- and runtime-intensive jobsite work. The 10.8V XR series is for precision work where compact, lightweight is the priority. If you already own DeWalt 18V batteries, go with an 18V model; if you want to build a 10.8V platform, choose the 10.8V models (DCF801 or DCF902) — battery sharing is economical.
Choose by Work Environment (Compact or Silent)
For frequent confined-space work, the DCF809P2 (87mm overall) is a reliable partner. For jobsites with strict noise regulations or dense residential work, the DCF870E2T (hydraulic silent mechanism) is the right choice. When you need the full performance of the flagship, the DCF860E2T is rarely the wrong answer.
Frequently Asked Questions (FAQ)
Q1. Are DeWalt 18V XR batteries interchangeable across the DCF series?
Yes, DeWalt 18V XR batteries (DCB182, DCB184, DCB187, etc.) are interchangeable across all 18V XR-compatible DCF models. Stocking multiple batteries and running multiple DCF tools on a single platform is one of the key advantages of the DeWalt 18V series.
Q2. Is after-sales service available in Japan?
DeWalt provides after-sales service in Japan for models sold through authorized Japanese distributors. Models with “-JP” suffixes (e.g., DCF860E2T-JP) are genuine Japan-market products and are eligible for warranty repairs. Parallel imports may not be covered under warranty — confirm whether the product is an authorized unit before purchasing.
Related Articles
For a guide to choosing cordless impact drivers including DeWalt, see the Impact Driver Recommended Rankings.
For other DeWalt tools including drill drivers and circular saws, visit the Power Tools category.